|
|
|
|
|
|
Available On
|
|
D-TEC is a comprehensive safety package for telescoping masts. D-TEC is a mast mounted sensor which contains:
- Look-up light to illuminate the area directly above the mast
- AC sensor to actively scan for nearby exposed high voltage
- Anti-collision system to detect overhead obstructions as small as 5mm diameter
- Tilt detector to warn if the system is not vertical
The AC sensor will provide a warning signal if voltage is detected. An alarm will sound and mast extension will be interrupted if contact with AC voltage is imminent. The anti-collision system will stop mast extension to avoid collision with overhead objects. The control box with alarms is mounted inside the vehicle supporting the telescoping mast.
Specifications
- Look-up light: 35W quartz halogen spotlight
- Anti-collision system will start to detect object: 10 ft. (3.1 m)
- Tilt warning if sensor deviates more than: 12° off vertical
- Power requirement: 12VDC, 5 Amp
- Dimensions - Sensor: 3" x 7" x 9.5" (76 x 178 x 241 mm)
- Dimensions - Control: 3.5" x 7.5" x 2" (89 x 190 x 50 mm)
- Weight: Sensor 3 lb. (1.5 kg)
- Interconnecting cable: 6 conductor shielded
- Environmental: Sensor: IP 67, Control: IP 65
|
|